Product technology notes, selection guidance and industry news.
Latent and sensible thermal storage both depend on effective heat release. Finned tube bundles compensate for the low conductivity of storage media and are a mainstream choice for in-tank heat exchange.
2026-08-23An air preheater uses flue gas waste heat to warm combustion air, raising boiler and furnace efficiency while reducing stack loss and emissions.
2026-08-23Steam air heaters are used for drying, sterilisation and process heating. Correct selection depends on steam pressure, air flow, required temperature and condensate drainage.
2026-08-23Air coolers use ambient air to cool process fluid, avoiding cooling water and water treatment. They suit water-scarce sites, but outlet temperature follows ambient dry-bulb temperature.
2026-08-23Spiral plate heat exchangers use a continuous curved channel with no tube bundle dead zones, making them suitable for particle-laden, fouling and viscous media.
2026-08-23The tube and fin material combination determines heat transfer, corrosion life and cost. Compare copper-copper, copper-aluminium and stainless steel options for fin coils.
2025-01-20Finned tube radiators extend the gas-side surface to improve heat transfer in air heating, cooling and heat recovery. Material and fin process selection determine life and efficiency.
2025-01-20A practical selection sequence for spiral plate heat exchangers: define the duty, select material and channel, choose the construction, then check pressure drop and velocity.
2025-01-20Shell and tube exchangers are adaptable and pressure-capable. Selection depends on which side the medium flows, material choice, velocity, temperature difference and cleaning method.
2025-01-20Waste heat recovery exchangers convert industrial exhaust heat into hot water, hot air or steam. Success depends on matching the recovered heat to a real demand and controlling corrosion and fouling.
2025-01-20Shell and tube exchangers combine a simple structure with pressure capability and material flexibility. They remain a core solution for chemical, petrochemical and power duty.
2025-01-20Finned tube heat exchangers add surface on the gas side, where the heat transfer coefficient is lowest. Material, fin process and cleaning access decide performance and life.
2025-01-20Finned tube condensers reject heat from refrigerant or process gas to air. Condensing temperature, heat load, air flow and material compatibility determine the design.
2025-01-20Cooling coils remove heat from air or process media. Face area, row depth, fin spacing and drain design determine temperature control, condensate removal and cleaning access.
Send us your working conditions and our engineers will run the thermal design and quote.